icon-phone-blue+62 896-3513-0972 icon-phone-blue sales@11bintang.net

Cover Image Cover Image

Non-woven - Cutting Dies (Tool Steel)

Category: Products / Non-woven Testing

Main Product Image

The Tool Steel Cutting Dies can cut plastics, paper, textiles and rubber samples. These allow sample preparation along with cutting presses. So that they can meet the various international quality standards. We can customize these to meet your testing needs.

The cutting dies can be used in conjuction with various cutting machines. All the cutting dies strictly follow thier relevant standard guidelines and sizes. They are made with accuracy and detailed attention. 

Type A 

Cutting die as per ISO 37-Type 2 •ISO 527-2-Type 5A •AS 1145-Type 5A •K6251-Type 6 •AS/NZS 1660.2.3 •DIN53504-S2

  • ISO 37 Type 2 - Rubber, vulcanized or thermoplastic — Determination of tensile stress-strain properties

  • ISO 527-2 Type 5A - Plastics — Determination of tensile properties — Part 2: Test conditions for moulding and extrusion plastics

  • AS 1145 Type 5A - Determination of tensile properties of plastics materials

  • JIS K6251 Type 6 - Type 6 Specimen Die

  • AS/NZS 1660.2.3 - Test methods for electric cables, cords and conductors, Method 2.3: Insulation, extruded semi-conductive screens and non-metallic sheaths - Methods specific to PVC and halogen free thermoplastic materials

  • DIN 53504-S2 - Testing of rubber - Determination of tensile strength at break, tensile stress at yield, elongation at break and stress values in a tensile test

Type B 

Cutting Die as per •ASTM D412-C •ISO 6259-3-Type 2 •K6251-Type 5 •ISO 37 – Type 1 •ISO 37-1 Type 2 •ISO 527-3 – Type 5 •BS 2782-3 (Method 320A) •AS 1145.3 – Type 5 •DIN53504-S1 •ASTM D882

  • ASTM D412 -C - Standard Test Methods for Vulcanized Rubber and Thermoplastic Elastomers—Tension

  • ISO 6259-3 Type 2 - Thermoplastics pipes — Determination of tensile properties — Part 3: Polyolefin pipes

  • JIS K6251-Type 5 - Rubber, Vulcanized or Thermoplastics - Determination of Tensile Stress-Strain Properties - Super Dummbell Cutters

  • ISO 37 – Type 1 - Rubber, vulcanized or thermoplastic — Determination of tensile stress-strain properties

  • ISO 37-1 Type 2 - Rubber, vulcanized or thermoplastic — Determination of tensile stress-strain properties

  • ISO 527-3 – Type 5 - Plastics — Determination of tensile properties — Part 3: Test conditions for films and sheets

  • BS 2782-3 (Method 320A) - Methods of testing plastics. Mechanical properties. Tensile strength, elongation and elastic modulus

  • AS 1145.3 – Type 5 - Determination of tensile properties of plastics materials Test conditions for films and sheets

  • DIN53504 - S1 - Testing of rubber - Determination of tensile strength at break, tensile stress at yield, elongation at break and stress values in a tensile test

  • ASTM D882 - Standard Test Method for Tensile Properties of Thin Plastic Sheeting

Type C

Die as per ASTM D412-D

  • ASTM D412-D - Standard Test Methods for Vulcanized Rubber and Thermoplastic Elastomers—Tension

Type D

cutting die as per JIS K6301-Type 3 •K6251- Type 3 •ISO 37 – Type 1A

  • JIS K6301 Type 3 - Physical Testing Methods for Vulcanized Rubber

  • K6251- Type 3 - Rubber, vulcanized or thermoplastic - Determination of tensile stress-strain properties - Super Dumbell Cutting Dies

  • ISO 37 - Type 1A - Rubber, vulcanized or thermoplastic — Determination of tensile stress-strain properties - Dumbell Die

Type E

cutting die steel ASTM D638-02a-Type 4 •ASTM D6693

  • ASTM D638-02a-Type 4 - Standard Test Method for Tensile Properties of Plastics - Test Speciment Cutting Die

  • ASTM D6693 - Standard Test Method for Determining Tensile Properties of Nonreinforced Polyethylene and Nonreinforced Flexible Polypropylene Geomembranes

Type F

JIS K6301-Type 1 standrad cutting die

  • JIS K6301-Type 1 - Test Samples - Physical Testing Methods for Vulcanized Rubber

 

Type G
  • cutting die JIS K6301-Type 2JIS K6301-Type 2 - Test Samples - Physical Testing Methods for Vulcanized Rubber
 
Type H   steel cutting die as per JIS K6301-Type 4
  • JIS K6301-Type 4 - Test Samples - Physical Testing Methods for Vulcanized Rubber
Type I   cutting die as per ISO 37 – Type 3 •AS/NZS 1660.2.3 •DIN 53504
  • ISO 37 – Type 3 - Determining the Tensile Properties of Vulcanized or Thermoplastic Rubber
  • AS/NZS 1660.2.3 - Test methods for electric cables, cords and conductors, Method 2.3: Insulation, extruded semi-conductive screens and non-metallic sheaths - Methods specific to PVC and halogen free thermoplastic materials
  • DIN 53504 - Testing of rubber - Determination of tensile strength at break, tensile stress at yield, elongation at break and stress values in a tensile test
Type J   cutting die for ISO 37 – Type 4 •ISO 527-2 – Type 5B
  • ISO 37 – Type 4 - Rubber, vulcanized or thermoplastic — Determination of tensile stress-strain properties - Dumbell Die
  • ISO 527-2 – Type 5B - Plastics — Determination of tensile properties — Part 2: Test conditions for moulding and extrusion plastics
 Type K   K6301- B •ASTM D624 – Type C •ASTM D1004-03 •DIN ISO34-1 cutting die
  • JIS K6301- B - Physical Testing Methods For Vulcanized Rubber
  • ASTM D624 – Type C - Standard Test Method for Tear Strength of Conventional Vulcanized Rubber and Thermoplastic Elastomers
  • ASTM D1004-03 - Standard Test Method for Initial Tear Resistance of Plastic Film and Sheeting
  • DIN ISO34-1 - Rubber, vulcanized or thermoplastic — Determination of tear strength — Part 1: Trouser, angle and crescent test pieces

Type L

ASTM D638-02a-Type 1 cutting die size

  • ASTM D638-02a-Type 1 - Standard Test Method for Tensile Properties of Plastics

Type M

cutting die ASTM D638-02a-Type 2

  • ASTM D638 - 02a -Type 2 - Standard Test Method for Tensile Properties of Plastics

Type N

cutting die for ASTM D638-02a-Type 3

  • ASTM D638-02a-Type 3 - Standard Test Method for Tensile Properties of Plastics

Type O

cutting die ASTM D638-02a-Type 5

  • ASTM D638-02a-Type 5 - Standard Test Method for Tensile Properties of Plastics

Type P

DIN ISO 34-1 •K6301-Type A •ASTM D624 – Type B cutting die

  • DIN ISO 34-1 - Rubber, vulcanized or thermoplastic — Determination of tear strength — Part 1: Trouser, angle and crescent test pieces
  • JIS K6301-Type A - Physical Testing Methods For Vulcanized Rubber
  • ASTM D624 – Type B - Standard Test Method for Tear Strength of Conventional Vulcanized Rubber and Thermoplastic Elastomers

Type Q

cutting die as per ASTM D1822-Type L

  • ASTM D1822-Type L - Standard Test Method for Tensile-Impact Energy to Break Plastics and Electrical Insulating Materials

Type R

ASTM D1822-Type S cutting die

  • ASTM D1822 - Standard Test Method for Tensile-Impact Energy to Break Plastics and Electrical Insulating Materials

Type S

ASTM D3574 – Type E cutting die size

  • ASTM D3574 – Type E - Standard Test Methods for Flexible Cellular Materials—Slab, Bonded, and Molded Urethane Foams

Type T

ASTM D3574 – Type F •DIN ISO34-1 cutting die

  • ASTM D3574 – Type F - Standard Test Methods for Flexible Cellular Materials—Slab, Bonded, and Molded Urethane Foams
  • DIN ISO 34-1 - Rubber, vulcanized or thermoplastic — Determination of tear strength — Part 1: Trouser, angle and crescent test pieces

Type U

Cutting die ISO 527-2 – Type 1A

  • ISO 527-2 – Type 1A - Plastics — Determination of tensile properties — Part 2: Test conditions for moulding and extrusion plastics

Type V

ISO 527-2 – Type 1B •ISO 527-3 – Type 1B •BS 2782-3 (Method 320B) •BS 2782-10 – Type 1 •ISO 6259-3 Type 1 cutting die steel

  • ISO 527-2 – Type 1B - Plastics — Determination of tensile properties — Part 2: Test conditions for moulding and extrusion plastics
  • ISO 527-3 – Type 1B - Plastics — Determination of tensile properties — Part 2: Test conditions for moulding and extrusion plastics
  • BS 2782-3 (Method 320B) - Methods of testing plastics. Mechanical properties. Tensile strength, elongation and elastic modulus
  • BS 2782-10 – Type 1 - Methods of testing plastics. Mechanical properties. Tensile strength, elongation and elastic modulus
  • ISO 6259-3 Type 1

Type W

ISO 527-2 – Type 1BA cutting die

  • ISO 527-2 – Type 1BA - Plastics — Determination of tensile properties — Part 2: Test conditions for moulding and extrusion plastics

Type X

ISO 527-2 – Type 1BB cutting die

  • ISO 527-2 – Type 1BB - Plastics — Determination of tensile properties — Part 2: Test conditions for moulding and extrusion plastics

Type Y

ISO 527-3 – Type 2 •AS 1145.2 – Type 2 cutting die test

  • ISO 527-3 – Type 2 - Plastics — Determination of tensile properties — Part 3: Test conditions for films and sheets
  • AS 1145.3 – Type 2 - Determination of tensile properties of plastics materials - Test conditions for moulding and extrusion plastics

Type Z

cutting die as per ISO 527-3 – Type 4 standard

  • ISO 527-3 – Type 4 - Plastics — Determination of tensile properties — Part 3: Test conditions for films and sheets

Type AA

ASTM D412 – Type A cutting die

  • ASTM D412 – Type A - Standard Test Methods for Vulcanized Rubber and Thermoplastic Elastomers—Tension

Type AB

ASTM D412 – Type B cutting die sizes

  • ASTM D412 – Type B - Standard Test Methods for Vulcanized Rubber and Thermoplastic Elastomers—Tension

Type AC

ASTM D412 – Type E cutting die

  • ASTM D412 – Type E - Standard Test Methods for Vulcanized Rubber and Thermoplastic Elastomers—Tension

Type AD 

ASTM D412 – Type F - Dumbell cutting die

  • ASTM D412 – Type F - Dumbell cutting die for Standard Test Methods for Vulcanized Rubber and Thermoplastic Elastomers—Tension

Type AE

cutting die for ISO 1798

 

  • ISO 1798 - Flexible cellular polymeric materials — Determination of tensile strength and elongation at break

Type AF 

cutting die for ASTM D1708 ASTM D2116 ASTM D4894 ASTM D4895 JIS K7137-2-A JIS K6935-2

  • ASTM D1708 - Standard Test Method for Tensile Properties of Plastics by Use of Microtensile Specimens
  • ASTM D2116 - Standard Specification for FEP Resin Molding and Extrusion Materials
  • ASTM D4894 - Standard Specification for Polytetrafluoroethylene (PTFE) Granular Molding and Ram Extrusion Materials
  • ASTM D4895 - Standard Specification for Polytetrafluoroethylene (PTFE) Resin Produced From Dispersion
  • JIS K 7137 -2-A - Plastics - Polytetrafluoroethylene (ptfe) Semi-finished Products - Part 1: Requirements And Designation
  • JIS K 6935-2 - Plastics - Fluoropolymer Dispersions And Moulding And Extrusion Materials - Part 2: Preparation Of Test Specimens And Determination Of Properties

We can also supply custom cutting dies on request. Simply send us the size and/or testing standard you are referring to and we will be happy to help. 

tags: Cutting Dies, Ruler Type, Manual Sample Cutters, tool steel cutting dies, steel cutting dies, ruler dies, ruler cutting dies, circular dies, machine die cut, metal dies, leather cutting dies, clicker cutting boards

Applications

  • Cardboard
  • Foam
  • Paper
  • Plastic
  • Rubber

Benefits

  • IDM Tool Steel Cutting Dies can be used with many cutting presses
  • Custom cutting dies available

Features

  • Able to be resharpened
  • Longer service life than ruler dies OPTIONS:
  • Custom Dies – on request
  • Cutting Die Adaptors
  • Cutting Presses
  • Certification - Reports

Standards

  • ASTM D638
  • AS 1145 
  • ISO 34-1
  • ISO 37 
  • ISO 527
  • ISO 1798 
  • ISO 6259
  • K6251 
  • K6301
  • AS/NZS 1660.2.3 
  • BS 2782-3
  • AS 1301.404 
  • AS 1683.11
  • AS 1180.2 
  • AS 2282.7
  • ASTM D412 
  • ASTM D470
  • ASTM D624 
  • ASTM D1004
  • ASTM 1660.2
  • ASTM D1822
  • ASTM D3574 
  • AS 1145.3
  • AS 1145.2 
  • ASTM D882 
  • DIN53504

 
Category: Products / Non-woven Testing